categorie

ADW - Izoplast E soluzione primer polimerico in dispersione

fabbricante: ADW

categoria: ADW - prodotti chimici per l'edilizia

N. prodotto: 12126

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
1.00EUR
per litro
prezzo promozionale
unità netta
0.84EUR
per litro
minimo commerciale
quantità del prodotto
5.00 litro
unità
commercio
5.00 litro
prezzo totale
listino prezzi netto
5.02EUR
per 5.00 litro
prezzo totale
rete promozionale
4.20EUR
per 5.00 litro
prezzo di listino
unità lorda
1.24EUR
per litro
prezzo promozionale
unità lorda
1.03EUR
per litro
minimo commerciale
quantità del prodotto
5.00 litro
unità
commercio
5.00 litro
prezzo totale
listino prezzi lordo
6.18EUR
per 5.00 litro
prezzo totale
promozionale lordo
5.17EUR
per 5.00 litro

Descrizione del prodotto

The product is intended for priming absorbent and porous substrates outside and inside the building. Particularly recommended for cement-lime plasters, aerated concrete, gypsum plasterboards and cement plasters.
Isoplast E is characterized by high penetration capacity, it is deeply absorbed into the ground, strengthening it, while allowing "breathing". These advantages improve the structure of substrates that have lost their proper parameters over time. It improves the adhesion to the surface of other materials that will be used on primed surfaces. By reducing the absorbency of the substrate, the consumption of applied material in emulsion coating paints, glue and mineral putty is reduced. Izoplast E, due to the content of biocide and fungicide, protects the primed substrate against the formation of mold fungus and bacterial growth in the product.

Technical data

  • Coverage: depending on the absorbency of the substrate, approx. 0.05 to 0.2 L / m2
  • 2-3 layers are made on the substrate with increased absorbency, not allowing the previous one to dry, more or less in a period of 3-4 hours, at a temperature of +5 to 25oC. Continued use of the surface is recommended after 24 hours.

Dati tecnici - proprietà

campo di temperatura di applicazione:
5 - 25 ° C
capacità [litro]:
5 l

allegati