categorie

Botament - Malta sigillante resistente ai solfati MS 30

fabbricante: Botament

categoria: BOTAMENTO - prodotti chimici per l'edilizia, impermeabilizzanti

N. prodotto: 31765

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
2.03EUR
per kg
prezzo promozionale
unità netta
1.46EUR
per kg
minimo commerciale
quantità del prodotto
25.00 kg
unità
commercio
25.00 kg
prezzo totale
listino prezzi netto
50.87EUR
per 25.00 kg
prezzo totale
rete promozionale
36.54EUR
per 25.00 kg
prezzo di listino
unità lorda
2.50EUR
per kg
prezzo promozionale
unità lorda
1.80EUR
per kg
minimo commerciale
quantità del prodotto
25.00 kg
unità
commercio
25.00 kg
prezzo totale
listino prezzi lordo
62.57EUR
per 25.00 kg
prezzo totale
promozionale lordo
44.95EUR
per 25.00 kg

Descrizione del prodotto

MS 30 is a sulphate-resistant mineral sealing mortar, used for insulating massive elements in buildings, both inside and outside buildings. It can also be used at negative water pressure. It is characterized by adhesion (without priming) to matt-moist substrates.

Technical data

  • cement mixture with mineral filling materials and plastic additives
  • density ~ 1.9 kg / dm 3
  • temperature resistance from -20 C to +80 C
  • optimal amount of water: for slurry ~ 22%; for plastering mix ~ 19%
  • mixture ratio: for slurry ~ 5.5 l water / 25 kg or 1.1 l water / 5 kg; for plaster mass ~ 4.8 l water / 25 kg or 1 l water / 5 kg
  • maturing time ~ 5 min
  • working time ~ 1 h
  • maximum layer thickness 3.5 mm
  • entering after about 12 hours
  • charge after about 5 days
  • interval between applying successive layers ~ 4 h
  • consumption: about 4.5 kg / m 2 for a layer thickness of 2.5 mm; about 6.7 kg / m 2 for a thickness of 3.5 mm
  • processing and substrate temperature from +5 C to +30 C
  • openness to water vapor diffusion
  • frost resistance and aging

Note: The above data is available at 23 C and 50% relative humidity.

Application

As insulation:

  • wet rooms
  • external and internal walls of basements
  • foundation slabs
  • plinth zone loaded with splash water
  • horizontal insulation, under the walls
  • for concrete, solid wall, plasters of category CS II, CS III and CS IV