Ceresit - Intonaco specialistico da risanamento CR 62
prezzo su richiesta
prezzo di listino
unità netta
24.67EUR per pacchetto
prezzo promozionale
unità netta
21.66EUR per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi netto
24.67EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
21.66EUR
per 1.00 pacchetto
prezzo di listino
unità lorda 30.34EUR
per pacchetto
prezzo promozionale
unità lorda
26.64EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi lordo
30.34EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
26.64EUR
per 1.00 pacchetto
Descrizione del prodotto
Ceresit CR 62 is used for making plaster in renovation thicknesses from 10 to 30 mm. It is designed especially for historic buildings, for renovation of damp and salty walls. It allows to obtain a dry surface of basement walls and facades. CR 62 can be used on large surfaces and for local repairs. Suitable for low strength substrates with low, medium and high salinity. Plaster CR 62 with the addition of Ceresit CC 81 contact emulsion can be an openwork coat that increases the adhesion of subsequent layers. Do not use on gypsum substrates, or to protect the wall against ground moisture, under water, etc.
Technical data
- compressive strength after 28 days according to DIN 1164: 1.5 to 5.0 MPa
- capillary rising of water W 24 according to DIN 52617: approx. 1.0 kg / m2
- coefficient of water vapor diffusion resistance according to DIN 52615: below 12
- air pore content in fresh mortar according to DIN 52615: approx. 30%
- content of air pores in the mortar in accordance with DIN 52615: above 40%
- the product has the required documents allowing use.
attention
Xi, Irritant. Irritating to eyes, respiratory system and skin. Risk of serious damage to eyes. May cause sensitization by skin contact.
Dati tecnici - proprietà
- base:
- mieszanka mineralnych spoiw, wypełniaczy mineralnych i modyfikatorów
- campo di temperatura di applicazione:
- 5 - 20 ° C
- coefficiente di conducibilità termica λ:
- 0,22 W / mK
- colore:
- szaro-beżowy
- densità apparente [kg / dm³]:
- 0,83 kg / dm³
- indossare:
- ok. 8,0 kg/m2 na każdy cm grubości tynku (z 1 kg CR 62 uzyskuje się ok. 1,25 dm3 świeżej zaprawy)
- Numero di pezzi su un pallet:
- 42 pz.
- quantità nella confezione:
- 20 kg
- rapporto di miscelazione:
- ok. 6,8 l wody na 25 kg
- tempo di usura:
- 15 min.
allegati