Coester - Resina epossidica bicomponente CT 228 Flex
prezzo su richiesta
prezzo di listino
unità netta
32.03EUR per kg
prezzo promozionale
unità netta
26.89EUR per kg
minimo commerciale
quantità del prodotto
6.00 kg
prezzo totale
listino prezzi netto
192.16EUR
per 6.00 kg
prezzo totale
rete promozionale
161.36EUR
per 6.00 kg
prezzo di listino
unità lorda 39.39EUR
per kg
prezzo promozionale
unità lorda
33.08EUR
per kg
minimo commerciale
quantità del prodotto
6.00 kg
prezzo totale
listino prezzi lordo
236.36EUR
per 6.00 kg
prezzo totale
promozionale lordo
198.47EUR
per 6.00 kg
Descrizione del prodotto
Colored epoxy resin, two-component used for making chemically resistant coatings on steel and concrete surfaces. The material has the ability to bridge cracks in the substrate and has a high surface value.
Properties
- two-component
- stained
- for making chemically resistant coatings on steel and concrete surfaces
- high adhesion to mineral substrates (except gypsum), as well as to steel and stainless steel
- has the ability to bridge cracks in the substrate and has a high surface hardness
Application
- chemical protection of concrete and steel substrates in industrial facilities
- on tanks in sewage treatment plants, livestock facilities, as well as in biogas plants
- on vertical and horizontal surfaces
- a protective layer of heavily loaded industrial floors
- chemically and mechanically resistant epoxy resin casing layer with quartz sand
- it can also be used in traffic areas as a closing coat of thick-layer systems in the protection of the substrate made as scratch putty
- when using the product on vertical surfaces, add Koester Stellmittel to the CT 228 Flex resin in an amount up to 6% by weight
Technical data
- a density of about 1.2 kg / l
- time to use (+10 C, +20 C) 60 min, 40 min
- application (ambient) temperature from +8 C to +30 C
- minimum substrate temperature +8 ° C
- material temperature during application from +15 C to +25 C
- color similar to RAL 7032 (other colors on request)
- adhesion: ≥ 1.5 N / mm 2 ; standard concrete C25 ≥ 1.5 N / mm 2 (failure in concrete); steel> 4 N / mm 2 (DIN EN ISO 12944-4, Ry 50 μm)
- subsequent layers after about 24 hours
- consumption: concrete min. 1.2 kg / m / mm; steel: 0.65 kg / m (500 μm)
- packing set of 6 kg
Dati tecnici - proprietà
allegati