categorie

Illbruck - Adesivo per montaggio su finestra SP351

fabbricante: Illbruck

categoria: ILLBRUCK - prodotti chimici per l'edilizia, sigillatura

N. prodotto: 33192

Un multiplo del numero ordinato: 20 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
12.49EUR
per pezzi
prezzo promozionale
unità netta
12.48EUR
per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
unità
commercio
1.00 pezzi
prezzo totale
listino prezzi netto
12.49EUR
per 1.00 pezzi
prezzo totale
rete promozionale
12.48EUR
per 1.00 pezzi
prezzo di listino
unità lorda
15.37EUR
per pezzi
prezzo promozionale
unità lorda
15.35EUR
per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
unità
commercio
1.00 pezzi
prezzo totale
listino prezzi lordo
15.37EUR
per 1.00 pezzi
prezzo totale
promozionale lordo
15.35EUR
per 1.00 pezzi

Descrizione del prodotto

A liquid window wedge, created on the basis of a safe polymer-based technology in hybrid illbricks SP with very high initial adhesion. The glue allows wedging the window in the face of the use of multifunctional expansion tapes. It allows you to perform several works in the window assembly process.

Properties

  • almost odorless
  • chemically neutral, does not cause corrosion
  • solvent-free, isocyanate-free and silicone-free - can be painted over
  • the wedges do not slip
  • excellent resistance to weather conditions and UV radiation
  • aging resistance
  • injection wedging of windows - providing point mechanical support for the window
  • Recommended for gluing window sills in interior and exterior on a previously prepared substrate
  • recommended for joining XPS / EPS with EPDM foil and for combination with any construction substrate
  • Compensates for stresses, thermal expansion and movement within the structural element in building structures
  • mechanical and sealing properties confirmed by the ift-Rosenheim Institute (compressive strength and tightness tests, load 60 kg / 1 wedging point of the injection window)
  • packaging: 600 ml foil bag, anthracite color

Technical data

  • density (according to DIN 52 451-A) 1.5 g / cm
  • viscosity during use (according to EN 27 390) stable
  • time to skin formation (relative humidity 50%) approx. 15 min
  • full hardening (23 C / 50% RH) approx. 3.5 mm / 1 day
  • volumetric shrinkage (according to DIN 52 451) 3.40%
  • Stress value at elongation (100% elongation; according to EN 53 504 S2) 1.5 N / mm
  • tensile strength (according to EN 53 504 S2) approx. 3 N / mm
  • compressibility (ift-Process) 0.76 N / mm
  • elongation (according to EN 53 504 S2) approx. 470%
  • Shore A hardness (according to DIN 53 505) approx. 55
  • reaction to thermal resistance (according to DIN 4102-1) B2 - normal flammability
  • thermal resistance from -40 C to +90 C.
  • short-term thermal resistance up to +200 ° C
  • can be used down to -5 ° C, excluding frosted surfaces
  • temperature of use from +5 C to +40 C
  • storage temperature from +5 C to +25 C in a dry place, in unopened original packaging
  • shelf life of 12 months