Isolamento Jarocin - soluzione di asfalto Jarlep GM
prezzo su richiesta
prezzo di listino
unità netta
3.35EUR per litro
prezzo promozionale
unità netta
2.97EUR per litro
minimo commerciale
quantità del prodotto
20.00 litro
prezzo totale
listino prezzi netto
67.04EUR
per 20.00 litro
prezzo totale
rete promozionale
59.38EUR
per 20.00 litro
prezzo di listino
unità lorda 4.12EUR
per litro
prezzo promozionale
unità lorda
3.65EUR
per litro
minimo commerciale
quantità del prodotto
20.00 litro
prezzo totale
listino prezzi lordo
82.46EUR
per 20.00 litro
prezzo totale
promozionale lordo
73.04EUR
per 20.00 litro
Descrizione del prodotto
JARLEP GM is a homogeneous black liquid solution for cold use without heating. Thanks to the use of high-quality asphalt, solvent and synthetic rubber, the solution has a wide range of applications and excellent performance parameters:
- reduced solution consumption per m2 of substrate - from 0.2 - 0.6 l / m2 depending on the type and condition of the substrate,
- more than twice as high performance, especially at reduced temperatures, which significantly reduces consumption;
- ability to dry quickly in up to 30 minutes at +23 C, which speeds up construction work;
- twice the depth of penetration deep into the primed substrate;
- significantly increased adhesion to all substrates found in construction;
- consistency facilitating spreading, which reduces the burden of work and the consumption of the solution;
- increased resistance to frost cracking, thanks to the use of synthetic rubber in;
Destiny
- priming new and old, refurbished concrete substrates before covering with weldable roofing felt; lightweight moisture insulation of foundations and foundation benches as well as balcony and terrace in;
- priming old roofing sheets in case of renovation;
- priming the element in metal, sheet metal, planks, roofing before covering with welding paper;
- priming all building substrates for self-adhesive roofing felt;
- impregnation and priming of wooden and wood-based substrates (chipboards, OSB) for heat-sealable roofing felt;
- insulation of manure plates, slurry tank, process water tank, concrete coil, septic tanks, etc .;
- anti-corrosive protection of steel structures, also galvanized;
- painting metal, wooden and concrete fences
Method of use
The solution is applied to a dry, cleaned from loose dirt, rust, etc. substrate with a roofing brush, brush, roller or spray. Optimal application temperature - above +5 C. On cooler days, to facilitate spreading the solution on the surface and reduce specific consumption, the packaging with JARLEP GM should be stored for 24 hours in a heated room before use.
Dati tecnici - proprietà
- consumo [l/mq]:
- 0,2 - 0,6 l / m
- punto d'infiammabilità:
- 31 - 40 ° C
- temperatura minima di applicazione:
- + 5 ° C
- capacità in litri:
- 10 l
allegati