categorie

Koester - intonaco minerale a grana fine Feinputz

fabbricante: Koester

categoria: KOESTER - prodotti chimici per l'edilizia

N. prodotto: 33937

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
2.50EUR
per kg
prezzo promozionale
unità netta
2.06EUR
per kg
minimo commerciale
quantità del prodotto
25.00 kg
unità
commercio
25.00 kg
prezzo totale
listino prezzi netto
62.61EUR
per 25.00 kg
prezzo totale
rete promozionale
51.53EUR
per 25.00 kg
prezzo di listino
unità lorda
3.08EUR
per kg
prezzo promozionale
unità lorda
2.54EUR
per kg
minimo commerciale
quantità del prodotto
25.00 kg
unità
commercio
25.00 kg
prezzo totale
listino prezzi lordo
77.01EUR
per 25.00 kg
prezzo totale
promozionale lordo
63.38EUR
per 25.00 kg

Descrizione del prodotto

Fine-grained, white, frost-resistant and weather-resistant, mineral, vapor-permeable, hydrophobic plaster for indoor and outdoor use. The surface of the plaster has a fine texture, is closed and is suitable as a base for wallpapering or painting. It is dedicated to filling and plastering mineral substrates, restoration plaster in Koester Sanierputz.

Properties

  • white high-strength restoration plaster
  • salt-resistant
  • masonry is suitable for plastering, even with high salinity and moisture
  • thanks to its high porosity and hydrophobicity, the plaster allows for damage-free desalination and drying of the wall, even at high salinity levels
  • prevents the formation of condensation water
  • improves thermal insulation
  • does not contain light fillers, therefore it does not require any additional surface treatment before applying subsequent layers (e.g. diffusion open wallpapers or paints)

Application

  • filling and plastering mineral substrates, plaster in renovation Koester Sanierputz, plaster in undercoat
  • outside and inside
  • plinths, facades and internal walls

Technical data

  • White color
  • felting possible after about 60 minutes (depending on the temperature)
  • subsequent layers (+20 C) drying 1 day per 1 mm of thickness
  • compressive strength class (28 days) CS III
  • mortar density about 1.9 kg / l
  • time to use (+20 C) approx. 1 h
  • maximum layer thickness (as plaster) 5 mm
  • maximum grain of aggregate 0.7 mm
  • consumption about 1.4 kg / m 2 per 1 mm of thickness
  • package 25 kg bag

allegati