categorie

Kotar - nastro per bordi con sovrapposizione e incisioni

fabbricante: Kotar

categoria: KOTAR - polistirolo, isolamento a pavimento floor

N. prodotto: 9982

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
0.39EUR
per mb
prezzo promozionale
unità netta
0.33EUR
per mb
minimo commerciale
quantità del prodotto
25.00 mb
unità
commercio
25.00 mb
prezzo totale
listino prezzi netto
9.81EUR
per 25.00 mb
prezzo totale
rete promozionale
8.31EUR
per 25.00 mb
prezzo di listino
unità lorda
0.48EUR
per mb
prezzo promozionale
unità lorda
0.41EUR
per mb
minimo commerciale
quantità del prodotto
25.00 mb
unità
commercio
25.00 mb
prezzo totale
listino prezzi lordo
12.07EUR
per 25.00 mb
prezzo totale
promozionale lordo
10.22EUR
per 25.00 mb

Descrizione del prodotto

The edge strip is intended for use when making floating floors as a floor separation, acting as a dilatation. The width of the tape used depends on the thickness of the constituent layers of the floor and should be selected so that after pouring the undercoat, the upper edge of the tape will protrude above the undercoat. After priming and hardening the foundation, excess edge tape should be cut off with a knife. It is made of foamed polyethylene LDPE with a density of min. 25 kg / m3, thickness 8 mm. Five incisions are made on the tape at intervals of 1 cm from the upper edge, allowing the excess edge tape protruding above the completed floor. In addition, it has an overlap of 25 cm wide PE foil used to cover the contact between the vertical (edge tape) and horizontal insulation (e.g. IZOROL boards).