Kreisel - Malta per protezione da contatto e corrosione 451
prezzo su richiesta
prezzo di listino
unità netta
51.22EUR per pacchetto
prezzo promozionale
unità netta
42.77EUR per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi netto
51.22EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
42.77EUR
per 1.00 pacchetto
prezzo di listino
unità lorda 63.00EUR
per pacchetto
prezzo promozionale
unità lorda
52.60EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi lordo
63.00EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
52.60EUR
per 1.00 pacchetto
Descrizione del prodotto
Mortar 451 is intended for making the contact layer (adhesive bridge) and corrosion protection in the concrete repair system at KREISEL. The layer should not be thicker than 3mm. It is a tack mortar between the concrete or reinforced concrete element being repaired and repair mortar 456 or mortar 460. It facilitates further repair work and increases the adhesion of subsequent applied system layers. Having a high carbonation rate, it protects reinforcing steel against corrosion. It is characterized by high adhesion to concrete and reinforcing steel as well as flexibility. The system enables the repair of concrete, reinforced concrete damaged by mechanical or corrosive factors. This mortar is water and frost resistant.
Technical data
- shrinkage after 28 days of hardening: 0.14%,
- thermal compatibility: ≥ 0.8 MPa,
- capillary absorption: ≤ 0.5 kgm-2h-0.5,
- soluble chromium (VI) content in the finished product mass: ≤ 0.0002%,
- classification according to PN-EN 1504-3: 2006: R2,
- Storage: up to 12 months from the date of production, in dry places and in undamaged factory packaging.
Dati tecnici - proprietà
- adesione al supporto in calcestruzzo:
- ≥ 1,5
- consumo d'acqua:
- 5,7-5,8 l na 25 kg zaprawy
- contenuto di cloruro:
- ≤ 0,05 %
- grana:
- do 0,5 mm
- indossare:
- ok. 1,6 kg zaprawy na 1 m2 na 1 mm grubości warstwy
- kg su pallet:
- 1200 kg
- quantità nella confezione:
- 25 kg
- resistenza alla compressione [MPa]:
- ≥ 30 MPa
- resistenza alla flessione [MPa]:
- ≥ 5 MPa
- spessore dello strato:
- max 3 mm
- temperatura di lavorazione e di applicazione:
- +5 do +25 ° C
- tempo di usura:
- 60 min.
allegati