Two-component, epoxy pouring mass used to fill expansion joints, as well as to close cracks and cracks.

Features

• resistant to acid or alkaline media, to water, sea and industrial atmosphere, oil, gasoline
• very good adhesion to the substrate (concrete, ceramic cladding, resin floors)
• creates a coating resistant to mechanical stress (abrasion, impact)
• resistant to domestic wastewater (sewage treatment plants)

Application

• filling expansion gaps from 5 to 35 mm on horizontal surfaces inside and outside the building
• closing scratches and cracks on horizontal surfaces, also loaded with circular traffic

Technical data

• composition epoxy resin, hardener, filler, pigment, additives
• gray color (RAL 7040)
• substrate and ambient temperature during application and bonding from +15 C to +30 C
• ratio component A: component B: 100: 54 (by weight)
• density 1.2 g / cm ³
• time to use the mixed component in 45 min
• initial drying time approx. 6 h (coating)
• time of full hardening of the coating 7 days
• breaking strength approx. 350 N
• elastic return ≥ 40%
• volume change ≤ 25%
• flow resistance ≤ 3 mm
• elongation at break ≥ 60%
• amplitude 12.5%
• consumption from 0.035 to 0.54 kg / rm depending on the size of the gap
• the product complies with the Polish standard PN EN ISO 11600 type F class 12.5 E-M1p
• packaging: set A 1.3 kg bucket + B 0.7 kg bottle