categorie

Nexler - Sottofondo medio PJ G40 (PYE G200 S40)

fabbricante: Nexler

categoria: NEXLER - feltro per tetti, tegole per tetti

N. prodotto: 20858

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
5.39EUR
per m2
prezzo promozionale
unità netta
4.11EUR
per m2
minimo commerciale
quantità del prodotto
7.50 m2
unità
commercio
7.50 m2
prezzo totale
listino prezzi netto
40.40EUR
per 7.50 m2
prezzo totale
rete promozionale
30.81EUR
per 7.50 m2
prezzo di listino
unità lorda
6.63EUR
per m2
prezzo promozionale
unità lorda
5.05EUR
per m2
minimo commerciale
quantità del prodotto
7.50 m2
unità
commercio
7.50 m2
prezzo totale
listino prezzi lordo
49.69EUR
per 7.50 m2
prezzo totale
promozionale lordo
37.90EUR
per 7.50 m2

Descrizione del prodotto

Asphalt felt with dimensions 7.5m x 1m x 4.0mm. Warp: Glass fabric. Type of mass: Asphalt with the addition of SBS elastomer. Top side: fine-grained mineral sprinkles. Bottom side: plastic film. For multi-layer roofing, as a primer and for single-layer lightweight moisture insulation (A). Fastening by welding or mechanically.

Application

  • Underfelt roofing in multilayer waterproofing systems roof in;
  • Dampproof insulation of the building, underground parts (type A).

Laying method

  • Lay by welding or mechanically fastening.

Conditions of use

  • The roofing felt should be laid by welding or mechanically fixed above 5 ° C on dry and uncontaminated surfaces;
  • Waterproofing should be carried out according to the technical design, developed in accordance with applicable building regulations, taking into account the manufacturer's guidelines;
  • Rolls of roofing felt should be protected from getting wet, direct sunlight and sources of heat;
  • Transport and store roofing paper in an upright position in one layer; secured against falling over and mechanical damage.

Dati tecnici - proprietà

dimensioni [m]:
1 x 7,5 m
flessibilità:
-5 ° C
kg su pallet:
720 kg
Numero di m2 su un pallet:
150 m2
numero di rotoli su un pallet:
20 pz.

allegati