categorie

Qmar - Concentrato extra grunt 1: 6

fabbricante: Qmar

categoria: QMAR - prodotti chimici per l'edilizia

N. prodotto: 15688

Un multiplo del numero ordinato: 12 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
7.73EUR
per pezzi
prezzo promozionale
unità netta
7.16EUR
per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
unità
commercio
1.00 pezzi
prezzo totale
listino prezzi netto
7.73EUR
per 1.00 pezzi
prezzo totale
rete promozionale
7.16EUR
per 1.00 pezzi
prezzo di listino
unità lorda
9.51EUR
per pezzi
prezzo promozionale
unità lorda
8.81EUR
per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
unità
commercio
1.00 pezzi
prezzo totale
listino prezzi lordo
9.51EUR
per 1.00 pezzi
prezzo totale
promozionale lordo
8.81EUR
per 1.00 pezzi

Descrizione del prodotto

EXTRA GRUNT KONCENTRAT is a modern primer in the form of a high-performance concentrate. It is used for priming highly absorbent and porous substrates, combining the features of a common primer and a deep primer.

Application

The use of primer allows for the strengthening and sealing effect of both the surface and the interior of the pores in the building material. Especially recommended for priming drywall, concrete, aerated concrete, gypsum, cement and cement-lime plaster under paints, adhesives, gypsum coats and other leveling coats.

Properties

  • colorless, non-flammable, solvent free
  • after drying, it forms a coating that increases the adhesion of adhesive masses and other surfacing compounds
  • increases resistance to scratching and regulates the absorbency of the substrate and the exchange of water vapor
  • reduces the consumption of paints for painting

Method of use

Dilute the preparation with water in the ratio: 1 part of the preparation to 6 parts of water. Mix well. It should be applied evenly to the substrate with a brush, paint roller or spray. On very absorbent substrates, the "wet on wet" priming can be repeated. Substrate temperature should be above +5 C. Drying time from 6 to 24 hours.

Performance

The consumption of the preparation depends on the degree of absorption of the substrate - 1 liter is enough for the priming of approximately 70-100 m2.

Storage

Store in places not exposed to sunlight, protecting against freezing.


Dati tecnici - proprietà

campo di temperatura di applicazione:
5 - 35 ° C
colore:
biały
completo indurimento:
1 giorno / giorni
consistenza:
ciecz
efficienza [m²/l]:
70 mq / l
odore:
słaby
odore:
charakterystyczny
peso specifico:
1 g / cm³
temperatura di conservazione:
od +10 do +25 ° C
tempo di asciugatura:
4 - 24 h
capacità in litri:
1 l

allegati