categorie

Sika - Membrana impermeabilizzante Sikaplan G-20

fabbricante: Sika

categoria: SIKA - prodotti chimici per l'edilizia

N. prodotto: 34280

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
14.33EUR
per m2
prezzo promozionale
unità netta
13.05EUR
per m2
minimo commerciale
quantità del prodotto
30.00 m2
unità
commercio
30.00 m2
prezzo totale
listino prezzi netto
429.81EUR
per 30.00 m2
prezzo totale
rete promozionale
391.59EUR
per 30.00 m2
prezzo di listino
unità lorda
17.62EUR
per m2
prezzo promozionale
unità lorda
16.06EUR
per m2
minimo commerciale
quantità del prodotto
30.00 m2
unità
commercio
30.00 m2
prezzo totale
listino prezzi lordo
528.67EUR
per 30.00 m2
prezzo totale
promozionale lordo
481.65EUR
per 30.00 m2

Descrizione del prodotto

Multilayer, reinforced with polyester mesh, synthetic, polymer, waterproofing roof membrane based on high-quality polyvinyl chloride (PVC). Contains UV radiation stabilizers and a flame retardant (in accordance with PN-EN 13956). Roof insulation membrane is used to cover flat surfaces of roofs - roof coverings mechanically attached to the roof substructure. Suitable for direct exposure in all climatic zones.

Features

  • resistance to the constant exposure to wind
  • resistance to mechanical damage and hail
  • resistance to permanent UV radiation
  • high vapor permeability
  • hot air welding without open fire
  • resistance to common environmental pollutants
  • recyclable

Technical data

  • structured surface
  • dark gray bottom layer
  • length 15 m (-0% / + 5% (acc. to PN-EN 1848-2)
  • 2.00 m wide (-0.5% / + 1% (acc. to PN-EN 1848-2)
  • effective thickness 2.0 mm (-5% / + 10% (according to PN-EN 1849-2)
  • straightness ≤ 30 mm (according to PN-EN 1848-2)
  • flatness ≤ 10 mm (according to PN-EN 1848-2)
  • mass per unit area 2.4 kg / m (-5% / + 10% (according to PN-EN 1849-2)
  • impact resistance: hard substrate ≥ 600 mm; soft substrate ≥ 900 mm - according to PN-EN 12691
  • hail resistance: rigid substrate ≥ 20 m / s; flexible substrate ≥ 36 m / s - according to PN-EN 13583
  • tensile strength: longitudinally (md) ≥ 1000 N / 50 mm; transversely (cmd) ≥ 900 N / 50 mm - according to PN-EN 12311-2
  • elongation: longitudinal (md) ≥ 15%; transverse (cmd) ≥ 15% - according to PN-EN 12311-2
  • dimensional stability: longitudinally (md) ≤ | 0.5 |%; transverse (cmd) ≤ | 0.5 |% - according to PN-EN 1107-2
  • tear strength: longitudinally (md) ≥ 150 N; transverse (cmd) ≥ 150 N - according to PN-EN 12310-2
  • shear resistance of the joint ≥ 600 N / 50 mm - according to PN-EN 12317-2
  • bendability at low temperatures ≤ -25 C (PN-EN 495-5)
  • behavior due to external fire B ROOF (t1) <20; B ROOF (t3) <10 - according to PN-EN 13501-5
  • reaction to fire class E (PN-EN ISO 11925-2, classification according to PN-EN 13501-1)
  • resistance to UV radiation (> 5000 h / degree 0) (PN-EN 1297)
  • water vapor permeability = 20,000 (PN-EN 1931)
  • watertightness according to PN-EN 1928
  • application conditions: ambient temperature minimum -15 C / maximum +60 C; substrate temperature minimum -25 C / maximum +60 C
  • storage conditions rolls must be stored at a temperature between +5 C and +30 C, horizontally on pallets, protected against direct sunlight, rain, snow, ice, etc. do not put pallets or other materials on rolls during transport and storage, best to use within 5 years from the date of production
  • length 15 m

allegati