Bolix - Bolix W malta per livellamento e muratura
prezzo su richiesta
prezzo di listino
unità netta
7.43EUR per pacchetto
prezzo promozionale
unità netta
7.25EUR per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi netto
7.43EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
7.25EUR
per 1.00 pacchetto
prezzo di listino
unità lorda 9.14EUR
per pacchetto
prezzo promozionale
unità lorda
8.92EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi lordo
9.14EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
8.91EUR
per 1.00 pacchetto
Descrizione del prodotto
It is used to level and fill unevenness in mineral substrates before making thin-layer plaster, fastening thermal insulation boards in thermal insulation systems, laying ceramic and stone cladding and pouring self-leveling floor mortars (on a cement or anhydrite basis). It is used outside and inside the building (including also in rooms exposed to temporary moisture), on non-deformable concrete, anhydrite substrates, on ceramic brick walls, sand-lime brick, cellular concrete as well as on cement and cement-lime plaster coatings . BOLIX W mortar is also used for masonry with a block and a component of cellular concrete
Technical data
- Mixing proportions: 2.75 3.25 l of water per 25 kg of mortar
- Compressive strength (after 28 days):> 8 MPa
- Flexural strength (after 28 days):> 3 MPa
- The load caused by walking layers of thickness 15 mm: after 24 hours
- Full load: after 14 days
- Consistency: dry powder
- Shelf life: under appropriate conditions, up to 12 months from the date of production
- Moisture resistance: periodically resistant
- Aging resistance: resistant
- Oil and solvent resistance: not resistant
- Acid and alkali resistance: not resistant
- Temperature resistance: from -20 C to +50 C
- all technical data are provided for a relative humidity of 60% and an air temperature of +20 C /
- The average consumption of adhesive mortar for making the dressing layer on a properly prepared substrate is approx. 1.90 kg / m2 for every 1 mm of layer thickness. In order to determine the exact consumption of the product, it is recommended to carry out tests on a given surface.
- composition: BOLIX W mortar is a dry mixture of hydraulic binders, polymer, base of fine-grained mineral fillers and modifying additives.
Dati tecnici - proprietà
- campo di temperatura di applicazione:
- 5 - 25 ° C
- classificazione al fuoco - reazione al fuoco:
- A1
- colore:
- grey
- densità apparente:
- 1,7 kg / dm³
- quantità nella confezione:
- 25 kg
- spessore dello strato:
- 5 - 15 mm
- tempo di usura:
- 45 min.
allegati