Highly deformable adhesive with waterproofing function, type C2TE S2. It has unique properties due to the use of polymer technology, double fiber technology and the technology of elastomeric fillers made of modified rubber.

Features

• highly flexible - high deformability class S2 (according to PN-EN 12002)
• three times higher initial adhesion, i.e. ≥ 1.5 N / mm
• the range of the thickness of the adhesive layer (2-10 mm) enables a thin-layer sticking of cladding on a different substrate and a thin-layer sticking of cladding on an uneven substrate, preceded by a leveling putty
• the form of a dry mix of the highest quality cement binder, aggregates and specially selected modifying agents
• reduced runoff allows the tile to be glued "from above", allowing you to start work from the top of the wall and avoid sticking the cut tiles on its exposed surface
• universality of use - the adhesive is dedicated to virtually all types of cladding, regardless of the size of the tiles (even over 5 m)
• the extended open time allows the tile to be applied to the adhesive even 30 minutes after it is applied to the substrate - it can be applied to a larger surface at one time and thus significantly shorten the working time
• frost-resistant and waterproof
• application with a steel toothed trowel

Application

• terraces, balconies, elevations, bathrooms, linear drains, kitchens, loggias, external stairs
• on the most difficult surfaces, e.g. metal, OSB, old tiles, underfloor heating, waterproofing
• under ceramic tiles, stoneware, quartz sinters, "slim" cladding, natural stone, composite panels
• possibility of application in one technological cycle
• crack bridging - 0.8 mm
• possibility of installing terrace profiles and sealing tapes
• one product - a comprehensive 2-in-1 solution - S2 class adhesive and waterproofing

Technical data

• a bulk density of about 1.1 g / cm
• mixing ratio (water / dry mix): 0.34-0.41 l / 1 kg, 5.10-6.15 l / 15 kg; waterproofing + tile fixing 0.37-0.41 l / 1 kg, 5.55-6.15 l / 15 kg
• minimum / maximum thickness of the adhesive: waterproofing + tile fixing 5 mm / 10 mm; sticking 2 mm / 10 mm tiles; 5 mm waterproofing
• adhesive preparation temperature, substrate and ambient temperature during work from +5 C to +25 C
• maturing time about 5 minutes
• lifetime (standby time) * approx. 2 h
• open working time * minimum 30 min
• correctability * approx. 10 min
• pointing of cladding * after approx. 24 h
• walking on the floor * after about 24 hours
• early resistance to rain for waterproofing laid in two technological cycles, about 24 hours
• full operational loads - pedestrian traffic * after 3 days
• full operational loads - road traffic * after 14 days
• full load under water - pool / reservoir * after 14 days
• underfloor heating (heated surfaces) * after 21 days
• reaction to fire B-s1, d0; B _fl - s1
• initial adhesion ≥ 0.5 N / mm ²
• product in accordance with the requirements of PN-EN 12004 + A1: 2012 and PN-EN 14891: 2012
• packaging: a foil bag of 15 kg

* times refer to the conditions in the application at a temperature of about 23 C and 55% humidity