Atlas - Primer Uni-Grunt ultra penetrante
prezzo su richiesta
prezzo di listino
unità netta
12.16EUR per pacchetto
prezzo promozionale
unità netta
10.85EUR per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi netto
12.16EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
10.85EUR
per 1.00 pacchetto
prezzo di listino
unità lorda 14.96EUR
per pacchetto
prezzo promozionale
unità lorda
13.34EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi lordo
14.96EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
13.34EUR
per 1.00 pacchetto
Descrizione del prodotto
A primer dedicated to various types of substrates (floors, walls, ceilings), inside and outside buildings.
Features
- penetrates the substrate and binds the aggregate grains, thus strengthening the primed layer
- high performance
- a specially selected pigment colors the substrate, enabling the control of the work progress, both when the ground is still wet and when it is already dry - the color obtained does not reduce the hiding power of paint coatings
- reduces the absorbency of the substrate
- definitely improves traction
- application with a brush, roller, spraying
- frost-resistant
- waterproof
Application
- priming surfaces before making floors, fixing floor coverings, plastering, filling, laying ceramic tiles, wallpapering and painting
- compensates for absorbency and reduces surface absorbability, which ensures adhesion of subsequent applied layers
- especially recommended for standard substrates, i.e. cement floors and screeds, anhydrite screeds, cement and cement-lime plasters and coats, gypsum plasters and coats, polymer coats, gypsum plasterboards, cellular concrete masonry, brick wall or block in silicate, brick or ceramic block wall, gypsum block wall
- recommended for difficult substrates, i.e. cement floors and screeds with underfloor heating, anhydrite screeds with underfloor heating, concrete, acrylic paint coatings, renovated substrates, covered with putty and paints, existing ceramic and stone cladding, terrazzo, OSB boards, stable linoleum, PVC, concrete varnishes, oil paint coatings
- indoor and outdoor, on horizontal and vertical surfaces
Technical data
- an emulsion density of about 1.0 g / cm
- substrate and ambient temperature during work from +5 C to +35 C
- commencement of further works after priming: after 15 minutes - plasters, silicate blocks, aerated concrete blocks; after 2 hours - self-leveling floors
Dati tecnici - proprietà
allegati