Bauder - adesivo per pellicola in PVC Thermofol Kontaktkleber
prezzo su richiesta
prezzo di listino
unità netta
20.94EUR per kg
prezzo promozionale
unità netta
17.71EUR per kg
minimo commerciale
quantità del prodotto
4.50 kg
prezzo totale
listino prezzi netto
94.21EUR
per 4.50 kg
prezzo totale
rete promozionale
79.69EUR
per 4.50 kg
prezzo di listino
unità lorda 25.75EUR
per kg
prezzo promozionale
unità lorda
21.78EUR
per kg
minimo commerciale
quantità del prodotto
4.50 kg
prezzo totale
listino prezzi lordo
115.88EUR
per 4.50 kg
prezzo totale
promozionale lordo
98.02EUR
per 4.50 kg
Descrizione del prodotto
Bauder Kontaktkleber contact adhesive is intended for the assembly of BauderTHERMOFOL foil on approved substrates. Assembly bonding of BauderTHERMOFOL U / M membranes in the area of connections with the wall and the attic, on skylights and ventilation. Approved substrates: plastic (GFK), steel, OSB, concrete, glass. Do not use for gluing on the entire surface, on EPS and on non-laminated PUR / PIR thermal insulation.
Mounting / Application
The gluing surfaces must be clean, dry, free of grease and dust-free,
apply the adhesive on both sides with a brush, the cleaned surface can be smeared possibly twice, allow about 10 minutes for ventilation, perform a finger test (no wet places on the surface), apply the adhesive precisely and press firmly, observe safety instructions, close the container after use.
Fire protection and health protection
- Reaction to fire: flammable
- Health hazard: irritant
properties
- Material: nitrile rubber and synthetic resin dissolved in fast evaporating, flammable organic solvents
- Color: light
- Odor: solvent-specific
- Flash point: - 17 C
- Relative thickness: 0.9 0.05 g / cm2
- Viscosity: 3500 mPas
- Consumption: 200 to 300 g / m2 depending on the surface
- Storage: in closed containers for at least 18 months
- Drying time: about 10-30 minutes
- Processing temperature: optimally 15-25 C, minimum 5 C
Dati tecnici - proprietà
- quantità nella confezione:
- 4,5 kg