Baumit - Nivello 30 composto autolivellante
prezzo su richiesta
prezzo di listino
unità netta
24.32EUR per pacchetto
prezzo promozionale
unità netta
17.15EUR per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi netto
24.32EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
17.15EUR
per 1.00 pacchetto
prezzo di listino
unità lorda 29.92EUR
per pacchetto
prezzo promozionale
unità lorda
21.09EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
prezzo totale
listino prezzi lordo
29.92EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
21.09EUR
per 1.00 pacchetto
Descrizione del prodotto
Self-leveling mass 2-30 mm. A factory-prepared, dry, cement-based mixture, grade CT-C35-F6, with an addition of synthetic resins, used for leveling and leveling new and old substrates inside the building, as bonded to the substrate. For manual and machine laying.
Features
- compensates for large unevenness in the ground
- very high compressive and bending strength
- excellent working properties and flow properties
- refined with the addition of synthetic resins
- creates a smooth and rough surface
- for smoothing and leveling the undercoat with underfloor heating
- for all kinds of finishing materials
- resistant to concentrated loads - movement of furniture castors
- for installation in wet rooms (bathrooms, showers, laundries, kitchens)
- low-emission - EMICODE EC1 PLUS
Application
- mineral substrates
- repairs and leveling of substrates with underfloor heating
- new and renovated living and public spaces
- as a base for all kinds of finishing layers, such as linoleum, PVC floor coverings, textile, rubber and ceramic and natural stone tiles, floor boards and parquets, floor panels
Technical data
- compressive strength (28 days) ≥ 35.0 N / mm 2
- bending strength (28 days) ≥ 6.0 N / mm 2
- recommended layer thickness 2-30 mm
- amount of water 6.0–6.5 liters of water (24-26%) per 25 kg bag
- consumption about 1.7 kg / m 2 for a layer thickness of 1 mm
- capacity about 1.5 m / bag / 10 mm
- possibility to enter after about 3 hours *
- laying floors after about 36 hours * (depending on the thickness of the screed and the type of finishing layer)
- use time about 20-30 minutes *
- package 25 kg
* for conditions in the application at a temperature of about +20 C and 60% humidity; higher temperatures and lower humidity accelerate, lower temperatures and higher humidity delay drying times
Dati tecnici - proprietà
allegati