White, mineral, smooth plaster used in thermal insulation systems and as a mineral putty to repair plaster in traditional and to make smooth surfaces, both inside and outside the building.

Features

• hydrophobic
• vapor permeable (breathable)
• resistant to weather conditions
• flexible
• good grip
• easy to apply
• reinforced with microfiber knobs

Application

The product is used to make smooth surfaces on reinforced layers in complex Ceresit Ceretherm thermal insulation systems. The material can also be used to repair traditional cement-lime plaster inside and outside buildings. The properties of CT 34 make it possible to make thin-layer smooth surfaces on ceilings and walls, completely covering rough and uneven surfaces, plaster in cement and cement-lime, reinforced layers . The thickness of the total plaster layer should be up to 5 mm.

Technical data

• base cement mixture with mineral fillers and modifiers
• density about 1.0 kg / dm ³
• mixing ratio 6.75–7.25 l of water per 25 kg
• application temperature from +5 C to +25 C
• usage time up to 2 h
• water absorption after 24 h <0.5 kg / m ² (according to ETAG 004)
• adhesion ≥ 0.35 N / mm ² (FP: B according to PN-EN 998-1)
• interlayer adhesion after aging ≥ 0.08 MPa (according to ETAG 004)
• water absorption category W0 (according to PN-EN 998-1)
• water vapor permeability S _d ≤ 1.0 m (according to ETAG 004)
• water vapor transmission factor μ ≤ 37 (according to PN-EN 998-1)
• thermal conductivity coefficient λ _{10, dry} 0.76 W / m K (according to PN-EN 998-1)
• impact resistance category III (according to ETAG 004)
• compressive strength CS II (according to PN-EN 998-1: 2010)
• reaction to fire: class B – s1, d0 in Ceresit Ceretherm Popular, Ceresit Ceretherm Classic, Ceresit Ceretherm Premium systems (according to PN-EN 13501-1)
• approximate consumption of about 1 kg / m ² for each mm of thickness
• package 25 kg bag