One-component low-pressure foam with high efficiency and stability of form, used to supplement acoustic and thermal insulation, fast assembly of door frames and to fill cavities.

Features

• accurate dosing
• dimensionally stable
• very good insulation
• 35% more performance
• harmless to the ozonosphere
• resistant to aging
• waterproof
• for indoor and outdoor use

Application

The foam is used for embedding and sealing door and window frames (the installation should be made with the use of a mechanical connector), roller shutter boxes, window sills, installation cabinets, etc. Thanks to the new, better formula, the foam efficiency is up to 35% higher. The foam is also used in the performance of acoustic and thermal insulation, for filling the culvert, connections, elements and for filling the defect in places where wires, pipes, etc. have been installed. -wet. The foam has excellent adhesion to plaster, wood, concrete, paper, masonry, metals, polystyrene, paint coatings and plastics (except for polyethylene, Teflon, silicone).

Technical data

• base polyurethane resin, propellant gas - propane / isobutane
• application temperature from +5 C to +35 C
• time of surface drying approx. 10 min
• pre-treatment time approx. 30 min
• hardening time about 8 hours
• water absorption after 24 hours in water, with partial immersion ≤ 0.5 kg / m ²
• compressive stress at 10% strain ≥ 14 kPa
• tensile strength ≥ 50 kPa
• adhesion of the foam depending on the material: wood ≥ 70 kPa; for steel ≥ 80 kPa; for PVC ≥ 90 kPa; for aluminum ≥ 80 kPa; for concrete ≥ 100 kPa
• temperature resistance from –40 C to +90 C
• packaging efficiency up to 59 dm ³ depending on the conditions for rising foam
• package of 870 ml