categorie

Kabe - il sistema di isolamento termico Kabe Therm

fabbricante: Kabe

categoria: KABE - prodotti chimici per l'edilizia, vernici, sistemi di isolamento termico

N. prodotto: 23559

Un multiplo del numero ordinato: 1 Aggiungi al carrello

Aggiungi agli Appunti Chiedi un prodotto Segnala un errore nella descrizione L'acquisto a rate è disponibile a partire da 100 PLN di valore del prodotto o dall'intero ordine.

prezzo su richiesta

prezzo di listino
unità netta
0.00EUR
per pacchetto
prezzo promozionale
unità netta
0.00EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
unità
commercio
1.00 pacchetto
prezzo totale
listino prezzi netto
0.00EUR
per 1.00 pacchetto
prezzo totale
rete promozionale
0.00EUR
per 1.00 pacchetto
prezzo di listino
unità lorda
0.00EUR
per pacchetto
prezzo promozionale
unità lorda
0.00EUR
per pacchetto
minimo commerciale
quantità del prodotto
1.00 pacchetto
unità
commercio
1.00 pacchetto
prezzo totale
listino prezzi lordo
0.00EUR
per 1.00 pacchetto
prezzo totale
promozionale lordo
0.00EUR
per 1.00 pacchetto

Descrizione del prodotto

The Kabe Therm system is the most popular system for insulating external walls of buildings. It is used in single- and multi-family housing, public and industrial buildings, both in existing and newly constructed buildings, up to a height of 25 m (for buildings erected before 01.04 . 1995 up to and including the eleventh floor height). Due to the easy assembly technology and low implementation costs, it is most often used for thermomodernization of buildings made in old energy-consuming technologies (not meeting the current requirements in thermal insulation). The system can be used on all typical mineral substrates (i.e. concrete, cement plaster, cement-lime plaster, sandstone and on raw walls made of bricks, block, block and other such material in ceramic or lime-sand), as well as on substrates covered with a good adhering facade paint or thin-layer plaster. The finishing layer of the system is Permuro acrylic plaster, which can be made in a wide range of colors and textures.

Technical data:

  • type of thermal insulation layer: EPS 70 or EPS 100 polystyrene boards,
  • thickness of the thermal insulation layer: from 20 to 200 mm inclusive,
  • method of fixing thermal insulation: gluing or gluing and mechanical fastening,
  • mechanical connector: optional (specified in the technical design),
  • reinforcing fabric: system fiberglass mesh with a basis weight of 145 or 165 g / m2,
  • fire classification: fire retardant system (NRO),
  • invoices: full, brushed / mixed,
  • grain thickness: 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm
  • adhesion: to concrete - greater or equal to 0.3 MPa; for foamed polystyrene - greater than or equal to 0.1 MPa,
  • interlayer adhesion: greater or equal to 0.1 MPa,
  • water absorption (after 24 hours): smaller or equal 1000 g / m2,
  • impact resistance: greater or equal to 3 J,
  • protects against adverse weather conditions,
  • has a finishing layer with high resistance to microcracks and mechanical damage,
  • ensures adequate thermal insulation of walls,
  • colors: natural white.

The system is subject to individual valuation.