System adhesive and mortar for filling Koester Hydrosiilikatplatte mineral tiles. It is also used to fill defects in mineral tiles.

Properties

• System mortar for bonding Koester Hydrosilikatplatte boards to the substrate and for filling board joints
• for filling the cavity in plates
• putty or plaster for smoothing surfaces of previously glued boards

Application

• glue used with Koester Hydrosilikatplatte boards, glued to the surfaces of internal walls
• the boards absorb excess moisture from the air, store it, and then evenly release the moisture back into the room
• by insulating the surface of the walls, the risk of water condensation on the surface of the boards is reduced
• thanks to high porosity, the boards have a very large specific surface, which allows for quick evaporation of moisture
• as a result of combining the described factors, by using Koester Hydrosilikatplatte boards, a healthy and pleasant indoor microclimate can be obtained

Technical data

• material base cement
• White color
• a bulk density of about 1.4 g / cm
• specific gravity about 1.7 g / cm
• working time (+20 C) approx. 45 min
• compressive strength approx. 12 N / mm
• bending tensile strength (after 24 h) approx. 3.5 N / mm
• consumption: 3.0 kg / m ² as an adhesive for boards; 1.7 kg / m ² for a thickness of 1 mm
• packaging 20 kg bag