Two-component, solvent-free injection epoxy resin for force-bonding cracks. Characterized by low viscosity. It closes, seals and sticks slightly damp and dry scratches. Can also penetrate into small cracks. Usage time is 80 minutes.

Properties

• does not contain fillers and softeners
• limited sedimentation at the bottom of the package
• high adhesion to stone, concrete, brick and steel elements
• thanks to its very high penetration capacity, the product permanently seals and connects scratches and cracks
• strengthens the structure of the material in construction

Application

• used without pre-injection to close dry and damp scratches and cracks, gaps and cavities and voids in concrete
• a product used when the edges of cracks or uneven elements in the structure must be structurally connected
• administered by pressure injection or by soaking scratches (pouring)

Technical data

• transparent color
• open time (according to EN ISO 9514) approx. 45 min (+20 C, quantity 100 g)
• application temperature minimum +8 C
• ideal application temperature +15 C
• density after mixing component in (DIN 53479) about 1.0 g / cm
• viscosity after mixing (ISO 2555) about 170 mPa s (+23 C)
• compressive strength (after 7 days)> 80 N / mm
• adhesion: concrete C50 / 60, dry> 4 N / mm; concrete C50 / 60, wet> 2 N / mm
• mixing ratio (A: B): 3.14: 1 by weight; by volume 2.8: 1
• consumption about 1 kg / 1 dm ^{3 of} cavity