Qmar - silicone per specchi
prezzo su richiesta
prezzo di listino
unità netta
5.57EUR per pezzi
prezzo promozionale
unità netta
5.21EUR per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
prezzo totale
listino prezzi netto
5.57EUR
per 1.00 pezzi
prezzo totale
rete promozionale
5.21EUR
per 1.00 pezzi
prezzo di listino
unità lorda 6.85EUR
per pezzi
prezzo promozionale
unità lorda
6.41EUR
per pezzi
minimo commerciale
quantità del prodotto
1.00 pezzi
prezzo totale
listino prezzi lordo
6.85EUR
per 1.00 pezzi
prezzo totale
promozionale lordo
6.41EUR
per 1.00 pezzi
Descrizione del prodotto
One-component, always flexible adhesive based on high-quality neutral silicone. Designed for gluing mirror mosaics (mirror-mirror connection) as well as for fixing decorative mirrors on various substrates: glaze, glass, plasters, concrete, metal, wooden or plastic frames. Neutral compared to the mirror layer protected according to the standard - does not cause discoloration.
properties
- after curing, the mass remains permanently elastic,
- resistant to weather conditions: water and changing temperatures,
- workability up to 5 minutes,
- binding speed approx. 2mm / 24h,
- application temperature - from + 50C to + 300C.
Substrate preparation and usage
Surfaces should be clean, dry and free from dust, dirt and grease. Concrete surfaces must be primed with acrylic primer. Before use, cut off the end of the tube and screw on the applicator (do not cut the end of the tube!). Squeeze the mass using a suitable gun. Apply in the form of r parallel bands spaced apart every 3-4 cm. Glue the mirror to the ground and leave it supported until the adhesive sets. When setting the adhesive, do not seal the rim of the mirror. The mirror support time and the amount of adhesive applied depend on the size and weight of the mirror.
attention
To avoid mistakes, check the suitability of the product for its intended use. Shelf life: 12 months.
Dati tecnici - proprietà
- colore:
- bezbarwny
- confezione [ml]:
- 300 ml
- consistenza:
- pasta
- peso specifico:
- 1,05 g / cm³
- resistenza termica dopo l'indurimento:
- od -30 do +150 ºC
- sistema di stagionatura:
- neutralny
- temperatura di conservazione:
- od +10 do +25 ° C
- tempo di elaborazione:
- 5 min.
- velocità di polimerizzazione:
- ok. 2mm / 24h
allegati