Fiber-reinforced, solvent-based material for waterproofing and repairing scratches on bituminous membranes, brick, concrete and mortar. It does not contain asbestos. Apply with a trowel.

Features

• ease of application
• can be applied with a trowel or putty knife
• delivered ready to use
• resistant to UV radiation
• does not run off vertical surfaces
• flexible, even at low temperatures
• ability to absorb scratches on the substrate

Technical data

• color / form black paste
• chemical base bituminous mass containing a solvent
• density 1.20-1.30 kg / l
• setting speed surface dry after 2 hours at +20 C (depending on the ambient and substrate temperature, relative humidity and coating thickness)
• solids content ~ 37% (by volume)
• volatile compounds in organic (VOC) ~ 15% (by volume)
• bitumen content in ~ 50% (by volume) solids
• coat thickness up to 5 mm
• service temperature minimum -30 C / maximum +70 C
• watertight up to a pressure of 0.50 bar
• high temperature behavior - softening point (ring and ball method)> 170 C (dry coating)
• Crack bridging capacity <2.0 mm (unreinforced coating) at +4 ° C
• resistant to fresh water, sea water and humic acids (from soft groundwater)
• consumption ~ 1.20 kg / m ² / mm of layer thickness
• application conditions: substrate and ambient temperature minimum +10 C / maximum +35 C; substrate moisture <3%
• storage conditions - product stored in factory-sealed, original and undamaged packaging is best used within 12 months from the date of production; protect against heat and direct sunlight
• package 5 kg